Sprache: DeutschLanguage: EnglishIdioma: EspañolЯзык: РусскийJęzyk: PolskiSpJazyk: Česky

06.05..2015
NEW !
TURN-OVER SYSTEM FOR 3D-PRESSES

Click here to go to the webpage directly.

 



Rapha-Systems Handels - GmbH

Griesperwarth 3-4
A-3262 Wang - Austria
Telefon: +43(0)7488/71133
Fax: +43(0)7488/7113312
E-Mail: office@rapha-systems.at

 

HomeProdukteInnovationÜber unsKontakt

DownloadsLinksSitemapImpressumGebrauchte Maschinen




To enlarge click on the picture!
 


Brushing Machine RBM-2000

Equipment Features

  • Eight-head rotating brushing system (pneumatic press-on steered)
  • Spiral Brush removes loose glue residues
  • Feed roller conveyor with component staggering
  • Driven band-cleaning brush

Options

  • Transport system with lay-up belt and angle transfer
  • Run-out accumulation roller conveyor with buffer function
  • Deionization of components after cleaning

Advantages

  • Adapts automatically to size and thickness of components, which makes random feeding possible
  • up to 4,000 parts / 8h shift

Description

The RBM 2000 is a buffing machine for foil coated 3D furniture front panels.
The eight-head rotating brush system removes the glue overspray from the back of the furniture front and  there is the possibility of buffing of rectangular and contour parts. The low-maintenance brushes are very durable, ensuring low production costs. Buffing Unit spray from the back of the furniture front panels, achieving an optimum texture of foil edges at the same time.

This result is achieved, because the disk brushes are put on the back of the front panels with pneumatically controlled pressure and clean them. Any remaining loose glue is removed by a spiral brush. The RBM 2000 has been designed for a capacity of up to 4,000 parts per shift. Therefore the machine is the perfect buffing system for
medium and large-scale productions. The RBM 2000 has been equipped with an automatic recognition of size and thickness of the furniture front panels, enabling an adaptation in the case of variable loading without loosing time in through-feed operation. Due to the flexible control system there is the possibility of buffing of rectangular and nearly all contour parts. The low-maintenance brushes are very durable, ensuring low production costs.

Production Capacities RBM-2000

Component Shape: Rectangular/Contour
Minimum Part Size (LxWxH): 180 x 90 x 14 mm (~ 7" x 31/2" x 1/2")
Maximum Part Size (LxWxH): 3000 x 650 x 38 mm (~ 118" x 251/2" x 11/2")
Brushing operation: up to 4,000 parts / 8h shift
Standard part size 650 x 400 mm (~ 251/2" x 153/4")

VIDEO (avi):
RBM-2000/8


 
Design by www.werbecluster.at Design by www.werbecluster.at