Sprache: DeutschLanguage: EnglishIdioma: EspañolЯзык: РусскийJęzyk: PolskiSpJazyk: Česky


Click here to go to the webpage directly.

LIGNA Hannover, Exhibition Hall 17, Stand G31
LIGNA Woodworking and Surface Technology - Tools and Machinery
2017-05-22 bis 2017-05-26
Georgia World Congress Center Atlanta Georgia USA Hall B,booth #5412;
IWF Atlanta Internation.Woodworking Machinery Fair
2016-08-24 bis 2016-08-27
Tüyap Fair Convention & Congress Center Istanbul_ Salon/Hall: 11 Stand/Booth: 1109B
28th Intern. Wood Processing Machines Cutting Tool Hand Tools Fair
2015-10-10 bis 2015-10-14
Nevada, LAS VEGAS Convention Center, Booth #7430
AWFS Fair Woodworking Trade Show 2015
2015-07-22 bis 2015-07-25
Messegelände Hannover - GERMANY; Hall 17 _Booth G31
LIGNA 2015 International Trade Fair for Wood & Furnitury Industry
2015-05-11 bis 2015-05-15
Georgia World Congress Center Atlanta; Booth #5412 – Hall B
IWF Atlanta Internation. Woodworking Machinery Fair
2014-08-20 bis 2014-08-23
Dubai International Exhibition Centre; Hall 8, Stand E3
Dubai International Wood and Wood Machinery Show 2014
2014-04-08 bis 2014-04-10
New China International Exhibition Center (NCIEC)
WMA China 2014 BOOTH No 4A35 - The Intern. Exhibition on Woodworking Machinery Supplies and Accessor
2014-02-25 bis 2014-02-28

0000-00-00 bis 0000-00-00

Rapha-Systems Handels - GmbH

Griesperwarth 3-4
A-3262 Wang - Austria
Telefon: +43(0)7488/71133
Fax: +43(0)7488/7113312
E-Mail: office@rapha-systems.at


HomeProdukteInnovationÜber unsKontakt

DownloadsLinksSitemapImpressumGebrauchte Maschinen

To enlarge click on the picture!



For the Foil-rolls stock and at the press.


The paternoster-foils storage systems serve for the storage of the foils-rolls.

  • Next to the membrane press on a minimum of space a large quantity of foils-rolls can be stored. Only by pressing a button you can get promptly and simple the needed foil-roll for the current pressing process.
  • As pre-storage for all foils-rolls - also on a minimum of space a large quantity of rolls can be stored which are everytime at hand.


  • Manual or automatic Cutting-System
  • Palette Paternoster
  • Ionization

Content of delivery:

  • Paternoster
  • Hangers
  • Roll transporter

Data sheet:

Pod-inside-diameter max. 90mm, bearing rods diameter 42.4 mm
Side panels - total all over the overall heigth
Protection lattice from 2.2 metres over the floor to the overedge overall-height
Load chain as a hollow-bolt chain
Fraction strength 100 kN, division 50 mm = bearing rods - hanger system raster
Rotation speed ca. 5.5 m/min
Control with a key-switch with return (Totmann) for switch on/off
Nominal voltage 400V;3N;50Hz, mains (net) connection-pipe with CEKON-Plug 16A
Mains (net) fuse (construction sided) 10A inert
Ground-load-capacity datas: (look to the following table)
Pre-requisite for installing is a good load-carrying capacitable floor, a plane and solid ground - NO "swimming" flooring!

to size chart

Design by www.werbecluster.at Design by www.werbecluster.at